# Recessed led lighting new construction

## Can I use new construction recessed lighting?

New – construction fixtures are supported by screwing or nailing the fixture’s frame to the ceiling joists. But if you have access to space above the ceiling where the fixture will be located, you can install new – construction recessed lights in your existing ceiling.

## What are the best LED recessed lights?

16 Best LED Recessed Lighting Hyperikon 4-Inch Dimmable 9W LED Recessed Lights . SANSI 15W LED Recessed Lights – Best 6 inch Dimmable. Sunco Lighting Energy Star Dimmable Recessed Downlight. Parmida LED Technologies 12W Dimmable Square Recessed Retrofit. LemonBest 18W Square LED Recessed Lighting Kit.

## How do you calculate how many LED recessed lights are needed?

Formula : total sq. footage x 1.5 = total wattage needed . Total wattage divided by 60 watts (or whichever wattage you need ) = total amount of recessed can lights . Example: 240 square foot room x 1.5 = 360 divided by 60 (the bulb wattage I’d like to use) = 6 recessed lights needed .

## Should I use 4 inch or 6 inch recessed lights?

4 inch lighting takes up considerably less space than 6 inch options or regular lighting . This makes it ideal for small rooms and surfaces where even an inch of space makes a big difference. Increased home value: Well installed and aesthetically placed recessed lights can raise the value of your home.

## Do LED recessed lights get hot?

Answer: While LEDs run much cooler than incandescents, their electronic components and external heat sinks do get quite hot ; you would still need to keep the insulation away from your fixtures. You could hire an electrician to replace each fixture with a sealed one rated for insulation contact (IC).

You might be interested:  How is math used in construction

## Do LED recessed lights need housing?

In new construction, recessed lighting is usually installed between ceiling joists, but you can retrofit recessed lighting almost anywhere in your home. If your ceiling is insulated, the recessed light fixtures must be IC housing rated, meaning they are approved for use near insulation.

## How far apart should recessed lights be?

A good general rule for placement if to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot high ceiling would be 4 feet between each light. This will give good spacing for general room lighting .

## What size wire for LED can lights?

Registered. 14 or 12 gauge if the circuit breaker is 15 amps or 12 gauge if the breaker is 20 amps.

## Are LED recessed lights worth it?

Pros of LED Recessed Lighting LED lights are known for their energy-saving potential and can save you a significant amount of money in the long run. This is due to the fact that LED lights burn at a much cooler temperature than conventional light bulbs and have a much longer useful lifespan.

## Is recessed lighting outdated?

Recessed lighting will never go out of style . However, the finishes and sizes will vary and change as time goes by. There are too many advantages of having the lighting recessed for them to eventually go out of style or phase out.

## Should recessed lighting be symmetrical?

The General Lighting Layout The purpose of general lighting is to provide even lighting throughout a room or area. The recessed lights should be aligned and equally spaced across the ceiling. Resist the temptation to place the lights according to objects in the room (such as furniture).

You might be interested:  New construction electrical costs

## How many LED recessed lights per room?

Make a Plan Whatever new recessed lighting you add should work with your existing fixtures. Measure your room to see how many fixtures you will need. A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination.

## How many LED recessed lights per square foot?

How many LED recessed lights per room? Whatever new recessed lighting you add should work with your existing fixtures. Measure your room to see how many fixtures you will need. A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space.

## Can you have too many recessed lights?

In fact, using too many recessed light may leave areas of your room dark and may even cost you more on your electric bill. Create a lighting plan. An expert can help you plan for the right number of lights based on the size of the space and the technical aspects of the light fixtures in question.